Litokol EpoxyGel Booster Accelerator 50 g

Description

Litokol EpoxyGel Booster – Cure Accelerator for Starlike and PowerGel Epoxy Gels (50 g)

EpoxyGel Booster is Litokol's catalytic accelerator for epoxy gels. Added as a third component, it speeds up the reaction so grout or adhesive is ready sooner in difficult conditions: low temperatures, high humidity, or substrates with low thermal inertia.

Litokol recommends it for Starlike Pro when applying at temperatures near 50°F (10°C). This 50 g pack doses one 5.5 lb (2.5 kg) unit; use two packs for an 11 lb (5 kg) unit of Starlike Pro, Starlike Easy or PowerGel Pro Max.

Key Features

• Accelerates curing of Starlike and PowerGel Pro / Pro Max epoxy gels
• Pre-dosed 50 g pack (2% mix ratio)
• Pot life approx. 60 minutes; light foot traffic after approx. 6 hours (Litokol data)
• Application temperature 41–86°F (+5 to +30°C)
• For interior use

Suitable For

Interior floors and walls, wet rooms, showers, spas and commercial kitchens grouted or set with Litokol epoxy gels.

How to Use

1. Mix Part B into Part A first.
2. Add the pre-dosed EpoxyGel Booster pack and mix at low speed until uniform.
3. Apply right away.

Do not mix with solvents or other foreign materials. Litokol lists it for indoor use only.

Sold by: Each (50 g pack for one 5.5 lb / 2.5 kg unit).