Slate Lite Extreme Protection 2.6 lbs
Slate-Lite Extreme Protection is a dual-component sealer designed to provide maximum protection in various applications. It is specifically formulated to safeguard Slate-Lite stone surfaces against dirt and stains.
Before application, ensure that the surface is clean, dry, and free from dust and grease. Begin by using a foam roller to apply the primer in a crisscross pattern. Take care not to exert excessive pressure to prevent the formation of bubbles. Allow the primer to dry for a minimum of 3 hours.
Next, mix the two components in the recommended ratio of 5:1. Apply the mixed product evenly with a foam roller, again using light pressure to avoid the appearance of white bubbles. Allow sufficient drying time. Clean the equipment immediately after use with water.
For enhanced protection, multiple applications are recommended.
- Easy to clean
- Smooth surface
- Minimal to slight color enhancement
- Consumption: approximately 0.026-0.030 lbs/sq.ft per coat
- Suitable for walls, shower, and bath areas
- High resistance
- Minimum of 1 coat: suitable for surfaces with low stress and wet areas in shower and bath
- Minimum of 2 coats: ideal for surfaces with high stress, such as tile backsplash in kitchens
- Suitable for wet areas but not intended for use in standing water