Litokol SafetyTex Anti-Fracture Reinforcing Fabric 1 m x 50 m Roll

Description

Litokol SafetyTex Anti-Fracture – Reinforcing Fabric for SafetyGel, 1 m x 50 m (538 sq ft)

SafetyTex Anti-Fracture is a thermo-modified, needle-punched polyester fabric with no chemical binders. It structurally reinforces the SafetyGel waterproofing membrane and is the reinforcement layer of Litokol's TileSafe System.

Embed it in the first coat of SafetyGel to increase anti-fracture performance. Litokol requires it outdoors and over expansion and control joints. Each roll is 100 cm wide and covers about 538 sq ft.

Key Features

• Reinforces the SafetyGel membrane
• Point load resistance ≥ 1000 lbf (ANSI A118.12)
• EN 14891 DM 02 P
• 100 g/m², 0.70 mm thick, free of chemical binders
• Roll 1 m x 50 m, about 538 sq ft

Suitable For

Showers, bathrooms, pools, terraces, balconies and other wet areas, indoors and outdoors.

How to Use

1. Apply a first coat of membrane.
2. Lay the tape/fabric into the wet coat and smooth out creases and air.
3. Cover with the next coat of membrane.

Sold by: Each (one roll).