Tile Doctor Faber Deep Protector Water Repellent for Tiled Surfaces 1 L

Description

Tile Doctor Faber Deep Protector Water Repellent for Tiled Surfaces – 1 L (33.8 fl oz)

DEEP PROTECTOR is an invisible, solvent-based, deep-penetrating water repellent from the Faber Showroom line. It stops water absorption and rising humidity in tiled surfaces, including through grout joints and small cracks, which helps prevent mold, efflorescence and leaks on terraces.

This product is part of the Faber Chimica Showroom line, made in Italy with professional-strength formulas packaged for homeowners and showroom use. It is distributed in the US by The Tile Doctor. Browse more sealers and color enhancers or pick up scrub pads and tools for application.

Key Features

• Stops rising humidity and water infiltration
• Protects grout joints and small cracks
• UV resistant, will not yellow
• Invisible, leaves no residue

Suitable Surfaces

Natural stone, terracotta, brick, concrete, clinker, and ceramic and porcelain tile, indoors and out.

How to Use

1. Apply to clean, completely dry surfaces at 41–104°F.
2. Apply an even coat by brush, roller, applicator or spray, without leaving excess.
3. On very absorbent surfaces, add a second coat about 1 hour later.
4. Dry in about 1 hour; wait 4–6 hours before foot traffic.

Always test in an inconspicuous area first, and follow the label and the Faber technical data sheet.

Size & Coverage

• Size: 1 L (33.8 fl oz)
• Coverage: About 108–161 sq ft per liter (10–15 m²/L, Faber).
• Sold individually (each)