Tile Doctor Faber Disycott Acid Post-Installation Cleaner 950 ml

Description

Tile Doctor Faber Disycott Acid Post-Installation Cleaner – 950 ml (32 fl oz)

DISYCOTT is a highly concentrated post-installation cleaner from the Faber Professional line. Its inhibited-acid formula removes cement-based grout haze, salts, limescale and efflorescence, and it was developed as a gentler alternative to muriatic acid for cleaning new tile.

This product is part of the Faber Chimica Professional line, made in Italy for installers, restoration pros and fabricators. It is distributed in the US by The Tile Doctor. Browse more tile and stone care supplies or pick up scrub pads and tools for application.

Key Features

• Removes cement grout residue, limescale, salts and efflorescence
• Inhibited-acid formula, a gentler alternative to muriatic acid
• Gentle on tiles and grout joints
• Highly concentrated

Suitable Surfaces

Acid-resistant ceramic, porcelain and natural stone. Do not use on acid-sensitive stone such as marble, limestone or travertine.

How to Use

1. Test in an inconspicuous area first.
2. Dilute with water according to how heavy the residue is (see the Faber technical data sheet).
3. Apply, scrub with a pad or brush, and keep the surface wet while working.
4. Pick up the dirty solution and rinse thoroughly with clean water.

Always test in an inconspicuous area first, and follow the label and the Faber technical data sheet.

Size & Coverage

• Size: 950 ml (32 fl oz)
• Coverage: 32 fl oz covers about 107–160 sq ft (Tile Doctor).
• Sold individually (each)